xref: /arm-trusted-firmware/plat/nvidia/tegra/soc/t194/drivers/se/se_private.h (revision 91f16700b400a8c0651d24a598fc48ee2997a0d7)

/*
 * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
 * Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef SE_PRIVATE_H
#define SE_PRIVATE_H

#include <lib/utils_def.h>
#include <tegra_def.h>

/* SE0 security register */
#define SE0_SECURITY				U(0x18)
#define SE0_SECURITY_SE_SOFT_SETTING		(((uint32_t)1) << 16U)

/* SE0 SHA GSCID register */
#define SE0_SHA_GSCID_0				U(0x100)

/* SE0 config register */
#define SE0_SHA_CONFIG				U(0x104)
#define SE0_SHA_TASK_CONFIG			U(0x108)
#define SE0_SHA_CONFIG_HW_INIT_HASH		(((uint32_t)1) << 0U)
#define SE0_SHA_CONFIG_HW_INIT_HASH_DISABLE	U(0)

#define SE0_CONFIG_ENC_ALG_SHIFT		U(12)
#define SE0_CONFIG_ENC_ALG_SHA	\
		(((uint32_t)3) << SE0_CONFIG_ENC_ALG_SHIFT)
#define SE0_CONFIG_DEC_ALG_SHIFT		U(8)
#define SE0_CONFIG_DEC_ALG_NOP	\
		(((uint32_t)0) << SE0_CONFIG_DEC_ALG_SHIFT)
#define SE0_CONFIG_DST_SHIFT			U(2)
#define SE0_CONFIG_DST_HASHREG	\
		(((uint32_t)1) << SE0_CONFIG_DST_SHIFT)
#define SHA256_HASH_SIZE_BYTES			U(256)

#define SE0_CONFIG_ENC_MODE_SHIFT		U(24)
#define SE0_CONFIG_ENC_MODE_SHA256	\
			(((uint32_t)5) << SE0_CONFIG_ENC_MODE_SHIFT)

/* SHA input message length */
#define SE0_IN_ADDR				U(0x10c)
#define SE0_IN_HI_ADDR_HI			U(0x110)
#define SE0_IN_HI_ADDR_HI_0_MSB_SHIFT		U(24)

/* SHA input message length */
#define SE0_SHA_MSG_LENGTH_0			U(0x11c)
#define SE0_SHA_MSG_LENGTH_1			U(0x120)
#define SE0_SHA_MSG_LENGTH_2			U(0x124)
#define SE0_SHA_MSG_LENGTH_3			U(0x128)

/* SHA input message left  */
#define SE0_SHA_MSG_LEFT_0			U(0x12c)
#define SE0_SHA_MSG_LEFT_1			U(0x130)
#define SE0_SHA_MSG_LEFT_2			U(0x134)
#define SE0_SHA_MSG_LEFT_3			U(0x138)

/* SE HASH-RESULT */
#define SE0_SHA_HASH_RESULT_0			U(0x13c)

/* SE OPERATION */
#define SE0_OPERATION_REG_OFFSET		U(0x17c)
#define SE0_UNIT_OPERATION_PKT_LASTBUF_SHIFT	U(16)
#define SE0_UNIT_OPERATION_PKT_LASTBUF_FIELD	\
		((uint32_t)0x1 << SE0_UNIT_OPERATION_PKT_LASTBUF_SHIFT)
#define SE0_OPERATION_SHIFT			U(0)
#define SE0_OP_START	\
		(((uint32_t)0x1) << SE0_OPERATION_SHIFT)

/* SE Interrupt */
#define SE0_SHA_INT_ENABLE			U(0x180)

#define SE0_INT_STATUS_REG_OFFSET		U(0x184)
#define SE0_INT_OP_DONE_SHIFT			U(4)
#define SE0_INT_OP_DONE_CLEAR	\
		(((uint32_t)0U) << SE0_INT_OP_DONE_SHIFT)
#define SE0_INT_OP_DONE(x)	\
		((x) & (((uint32_t)0x1U) << SE0_INT_OP_DONE_SHIFT))

/* SE SHA Status */
#define SE0_SHA_STATUS_0			U(0x188)
#define SE0_SHA_STATUS_IDLE			U(0)

/* SE error status */
#define SE0_ERR_STATUS_REG_OFFSET		U(0x18c)
#define SE0_ERR_STATUS_CLEAR			U(0)

/* SE error status */
#define SECURE_SCRATCH_TZDRAM_SHA256_HASH_START	SECURE_SCRATCH_RSV68_LO
#define SECURE_SCRATCH_TZDRAM_SHA256_HASH_END	SECURE_SCRATCH_RSV71_HI

/* SE0_INT_ENABLE_0 */
#define SE0_INT_ENABLE				U(0x88)
#define  SE0_DISABLE_ALL_INT			U(0x0)

/* SE0_INT_STATUS_0 */
#define SE0_INT_STATUS				U(0x8C)
#define  SE0_CLEAR_ALL_INT_STATUS		U(0x3F)

/* SE0_SHA_INT_STATUS_0 */
#define SHA_INT_STATUS				U(0x184)
#define SHA_SE_OP_DONE				(U(1) << 4)

/* SE0_SHA_ERR_STATUS_0 */
#define SHA_ERR_STATUS				U(0x18C)

/* SE0_AES0_INT_STATUS_0 */
#define AES0_INT_STATUS				U(0x2F0)
#define  AES0_SE_OP_DONE			(U(1) << 4)

/* SE0_AES0_ERR_STATUS_0 */
#define AES0_ERR_STATUS				U(0x2F8)

/* SE0_AES1_INT_STATUS_0 */
#define AES1_INT_STATUS				U(0x4F0)

/* SE0_AES1_ERR_STATUS_0 */
#define AES1_ERR_STATUS				U(0x4F8)

/* SE0_RSA_INT_STATUS_0 */
#define RSA_INT_STATUS				U(0x758)

/* SE0_RSA_ERR_STATUS_0 */
#define RSA_ERR_STATUS				U(0x760)

/* SE0_AES0_OPERATION_0 */
#define AES0_OPERATION				U(0x238)
#define  OP_MASK_BITS				U(0x7)
#define  SE_OP_CTX_SAVE				U(0x3)

/* SE0_AES0_CTX_SAVE_CONFIG_0 */
#define	CTX_SAVE_CONFIG				U(0x2D4)

/* SE0_AES0_CTX_SAVE_AUTO_STATUS_0 */
#define CTX_SAVE_AUTO_STATUS			U(0x300)
#define  CTX_SAVE_AUTO_SE_READY			U(0xFF)
#define	 CTX_SAVE_AUTO_SE_BUSY			(U(0x1) << 31)

/* SE0_AES0_CTX_SAVE_AUTO_CTRL_0 */
#define CTX_SAVE_AUTO_CTRL			U(0x304)
#define	 SE_CTX_SAVE_AUTO_EN			(U(0x1) << 0)
#define	 SE_CTX_SAVE_AUTO_LOCK_EN		(U(0x1) << 1)

/* SE0_AES0_CTX_SAVE_AUTO_START_ADDR_0 */
#define CTX_SAVE_AUTO_START_ADDR		U(0x308)

/* SE0_AES0_CTX_SAVE_AUTO_START_ADDR_HI_0 */
#define CTX_SAVE_AUTO_START_ADDR_HI		U(0x30C)

/*******************************************************************************
 * Inline functions definition
 ******************************************************************************/

static inline uint32_t tegra_se_read_32(uint32_t offset)
{
	return mmio_read_32((uint32_t)(TEGRA_SE0_BASE + offset));
}

static inline void tegra_se_write_32(uint32_t offset, uint32_t val)
{
	mmio_write_32((uint32_t)(TEGRA_SE0_BASE + offset), val);
}

#endif /* SE_PRIVATE_H */