xref: /arm-trusted-firmware/plat/arm/common/aarch64/arm_bl2_mem_params_desc.c (revision 91f16700b400a8c0651d24a598fc48ee2997a0d7)

/*
 * Copyright (c) 2016-2023, ARM Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <platform_def.h>

#include <common/bl_common.h>
#include <common/desc_image_load.h>

/*******************************************************************************
 * Following descriptor provides BL image/ep information that gets used
 * by BL2 to load the images and also subset of this information is
 * passed to next BL image. The image loading sequence is managed by
 * populating the images in required loading order. The image execution
 * sequence is managed by populating the `next_handoff_image_id` with
 * the next executable image id.
 ******************************************************************************/
static bl_mem_params_node_t bl2_mem_params_descs[] = {
#ifdef SCP_BL2_BASE
	/* Fill SCP_BL2 related information if it exists */
	{
		.image_id = SCP_BL2_IMAGE_ID,

		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),

		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
			VERSION_2, image_info_t, 0),
		.image_info.image_base = SCP_BL2_BASE,
		.image_info.image_max_size = PLAT_CSS_MAX_SCP_BL2_SIZE,

		.next_handoff_image_id = INVALID_IMAGE_ID,
	},
#endif /* SCP_BL2_BASE */

#ifdef EL3_PAYLOAD_BASE
	/* Fill EL3 payload related information (BL31 is EL3 payload)*/
	{
		.image_id = BL31_IMAGE_ID,

		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
			VERSION_2, entry_point_info_t,
			SECURE | EXECUTABLE | EP_FIRST_EXE),
		.ep_info.pc = EL3_PAYLOAD_BASE,
		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
			DISABLE_ALL_EXCEPTIONS),

		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
			VERSION_2, image_info_t,
			IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),

		.next_handoff_image_id = INVALID_IMAGE_ID,
	},

#else /* EL3_PAYLOAD_BASE */

	/* Fill BL31 related information */
	{
		.image_id = BL31_IMAGE_ID,

		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
			VERSION_2, entry_point_info_t,
			SECURE | EXECUTABLE | EP_FIRST_EXE),
		.ep_info.pc = BL31_BASE,
		.ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
			DISABLE_ALL_EXCEPTIONS),
#if DEBUG
		.ep_info.args.arg3 = ARM_BL31_PLAT_PARAM_VAL,
#endif

		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
			VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
		.image_info.image_base = BL31_BASE,
		.image_info.image_max_size = BL31_LIMIT - BL31_BASE,

# if defined(BL32_BASE)
		.next_handoff_image_id = BL32_IMAGE_ID,
# elif ENABLE_RME
		.next_handoff_image_id = RMM_IMAGE_ID,
# else
		.next_handoff_image_id = BL33_IMAGE_ID,
# endif
	},
	/* Fill HW_CONFIG related information */
	{
		.image_id = HW_CONFIG_ID,
		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
			VERSION_2, entry_point_info_t,
			NON_SECURE | NON_EXECUTABLE),
		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
		.next_handoff_image_id = INVALID_IMAGE_ID,
	},
	/* Fill SOC_FW_CONFIG related information */
	{
		.image_id = SOC_FW_CONFIG_ID,
		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
		.next_handoff_image_id = INVALID_IMAGE_ID,
	},

# if ENABLE_RME
	/* Fill RMM related information */
	{
		.image_id = RMM_IMAGE_ID,
		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
			VERSION_2, entry_point_info_t, EP_REALM | EXECUTABLE),
		.ep_info.pc = RMM_BASE,
		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
			VERSION_2, image_info_t, 0),
		.image_info.image_base = RMM_BASE,
		.image_info.image_max_size = RMM_LIMIT - RMM_BASE,
		.next_handoff_image_id = BL33_IMAGE_ID,
	},
# endif

# ifdef BL32_BASE
	/* Fill BL32 related information */
	{
		.image_id = BL32_IMAGE_ID,

		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
			VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
		.ep_info.pc = BL32_BASE,

		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
			VERSION_2, image_info_t, 0),
		.image_info.image_base = BL32_BASE,
		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,

# if ENABLE_RME
		.next_handoff_image_id = RMM_IMAGE_ID,
# else
		.next_handoff_image_id = BL33_IMAGE_ID,
# endif
	},

	/*
	 * Fill BL32 external 1 related information.
	 * A typical use for extra1 image is with OP-TEE where it is the pager
	 * image.
	 */
	{
		.image_id = BL32_EXTRA1_IMAGE_ID,

		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),

		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
		.image_info.image_base = BL32_BASE,
		.image_info.image_max_size = BL32_LIMIT - BL32_BASE,

		.next_handoff_image_id = INVALID_IMAGE_ID,
	},

	/*
	 * Fill BL32 external 2 related information.
	 * A typical use for extra2 image is with OP-TEE where it is the paged
	 * image.
	 */
	{
		.image_id = BL32_EXTRA2_IMAGE_ID,

		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),

		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
#ifdef SPD_opteed
		.image_info.image_base = ARM_OPTEE_PAGEABLE_LOAD_BASE,
		.image_info.image_max_size = ARM_OPTEE_PAGEABLE_LOAD_SIZE,
#endif
		.next_handoff_image_id = INVALID_IMAGE_ID,
	},

	/* Fill TOS_FW_CONFIG related information */
	{
		.image_id = TOS_FW_CONFIG_ID,
		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
			VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
		.next_handoff_image_id = INVALID_IMAGE_ID,
	},
# endif /* BL32_BASE */

	/* Fill BL33 related information */
	{
		.image_id = BL33_IMAGE_ID,
		SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
			VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
# ifdef PRELOADED_BL33_BASE
		.ep_info.pc = PRELOADED_BL33_BASE,

		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
# else
		.ep_info.pc = PLAT_ARM_NS_IMAGE_BASE,

		SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
			VERSION_2, image_info_t, 0),
		.image_info.image_base = PLAT_ARM_NS_IMAGE_BASE,
		.image_info.image_max_size = ARM_DRAM1_BASE + ARM_DRAM1_SIZE
			- PLAT_ARM_NS_IMAGE_BASE,
# endif /* PRELOADED_BL33_BASE */

		.next_handoff_image_id = INVALID_IMAGE_ID,
	},
	/* Fill NT_FW_CONFIG related information */
	{
		.image_id = NT_FW_CONFIG_ID,
		SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
			VERSION_2, entry_point_info_t,
			NON_SECURE | NON_EXECUTABLE),
		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
			VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
		.next_handoff_image_id = INVALID_IMAGE_ID,
	},
#endif /* EL3_PAYLOAD_BASE */

# if ETHOSN_NPU_TZMP1
	{
		.image_id = ETHOSN_NPU_FW_IMAGE_ID,
		SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
				      VERSION_2, image_info_t, 0),
		.image_info.image_base = ETHOSN_NPU_FW_IMAGE_BASE,
		.image_info.image_max_size = ETHOSN_NPU_FW_IMAGE_LIMIT -
			ETHOSN_NPU_FW_IMAGE_BASE,
		.next_handoff_image_id = INVALID_IMAGE_ID,
	},
#endif /* ETHOSN_NPU_TZMP1 */
};

REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)